CN
EN
01 No benzene and ketone solvents, little environmental pollution;- 02 Universal, suitable for all kinds of composite packaging film printing;
- 03 Printed products full color, bright color, strong sense of layer;
- 04 The adaptability of the scraper and the reproducibility of the dot are excellent, and the printing adaptability is good.
- 05 Low solvent residue.
Good adhesion to the following films:
Polyester (PET) treatment degree of 42 dyne or more
Nylon (NY) treatment degree above 52 dyne
OPP processing degree above 38 dyne
K-coated (including K cellophane) printing grade
Suitable for dry compound, solvent-free compound, water glue compound;
The printing viscosity of color inks and white inks is set at approximately 13 to 20 seconds /25 ° C 3# Chaen cup. (When using medium and slow drying diluents, be very careful of residual solvents and sticky dirt.)
|
OHPF#1 |
OHPF#2 |
OHPF#3 |
|
|
N-propyl acetate |
|
70 |
50 |
|
Ethyl acetate |
80 |
|
|
|
Butyl acetate |
10 |
20 |
40 |
|
Isopropyl alcohol |
10 |
10 |
10 |
Note: OHPU1# dries fastest, OHPU3# dries slowest
Example speed 180 m/min white ink diluent ratio with 1# dilution ratio
Color ink diluent ratio with 2# dilution ratio
Red (including original red, golden red, big red), original yellow and spot colors with these colors can not be used for water (steamed) boiled packaging products, do not infiltrate purple, original blue, original green, black, white can be used for cooking. If customers need to use water cooking products, please communicate with our company before use, and then assess the printing risk;
This product should not be mixed with similar products of other manufacturers. When preparing diluent, please check the quality of the solvent in advance to prevent ink deterioration.
This product can not be printed as extrusion structure, extrusion products please choose our LYMO system;
The ink in the bucket should be shaken before use to ensure quality consistency;
This product should be kept away from fire, sealed, shelf life of one year.