CN
EN
01 Suitable for surface printing of plastic film such as PE.- 02 This product has good printability and excellent shallow net transfer.
- 03 Passed the EU RoHS standard, EN71-3 heavy metal test.
- 04 The printed matter has good resistance to backsticking.
The surface treated polyethylene and polypropylene plastic film can also be used for the printing of aluminum foil, aluminum foil, PET film and other materials (please check the adhesion between the ink and the substrate before printing to avoid loss).
1, mainly used for non-food plastic packaging surface printing.
2, this product is not suitable for printing high temperature cooking food packaging.
3, not suitable for composite processing.
Depending on the printing speed, viscosity is recommended.
Normal white: 12 ~ 16 seconds /25℃ No. 3 Chaen cup
Normal color: 13 ~ 17 seconds /25℃ No. 3 Chaen cup
Suitable speed: 60 m ~ 200 m/min
This product has three kinds of solvent ratio, the user according to the printing conditions to choose
|
Number one |
Isopropyl alcohol 30% |
Ethyl acetate 30% |
Methylcyclohexane 30% |
Butyl acetate 10% |
|
Number two |
Isopropyl alcohol 30% |
N-propyl acetate 30% |
Methylcyclohexane 30% |
Butyl acetate 10% |
|
Number 3 |
Isopropyl alcohol 30% |
Butyl acetate 30% |
Methylcyclohexane 40% |
|
Note: No. 1 dries fastest, No. 3 dries slowest.
When this product is printed on the machine, the diluent must contain not less than 20% methylcyclohexane.
Do not use water or alcohol solvents with high water content and gasoline as diluents.
When the diluent is prepared, please check the quality of the solvent in advance to prevent the deterioration of the ink.
The ink in the bucket should be shaken before use to ensure quality consistency.
This product should be kept away from fire, sealed, shelf life of one year.