CN
EN
01 This product does not contain benzene and ketone solvents, the pigment used in heavy metals does not exceed the standard, and the printed matter has no odor.- 02 High temperature resistance, no decolorization or migration at 160℃/1 second /0.3Kpa heat seal.
- 03 The surface is smooth and the friction coefficient on the surface of the printing ink layer is small.
- 04 Print does not restick, do not migrate, do not curl.
- 05 Excellent printing adaptability, and satisfactory results can also be obtained when printing with low viscosity.
PE: Handle above 38 dynes
CPP: Processing above 38 dynes
Coated paper, decorative paper
It is mainly used for the packaging of personal care products such as soft tissue paper, toilet roll paper, handkerchief paper and printing of decorative paper.
White ink: 11 ~ 14 seconds /25℃ No. 3 Chaen cup Color ink: 13 ~ 16 seconds /25℃ No. 3 Chaen cup.
|
NW#1 |
NW#2 |
NW#3 |
NW#4 |
|
|
N-propyl acetate |
30 |
40 |
50 |
50 |
|
Ethyl acetate |
70 |
50 |
30 |
/ |
|
Butyl acetate |
/ |
/ |
10 |
30 |
|
Isopropyl alcohol |
/ |
10 |
10 |
20 |
Note: NW1# dries fastest, NW4# dries slowest.
Do not mix with other manufacturers' alcohol-soluble inks, this product is not suitable for composite packaging printing.
Because the plastic substrate used by each factory is different, the adhesion of the ink will also be different, so the ink adhesion risk assessment should be carried out before printing the plastic substrate used to avoid loss.
Some CPP and PE plastic films can obtain better adhesion and slip after printing for 2 to 4 hours. When printing with other inks, please evaluate the adhesion and surface friction coefficient of the layer first.
If you want to use it for surface printing, you need to perform a risk assessment for gloss and adhesion before printing.
When using a small amount of red or yellow and a large amount of white ink to adjust the spot color, the resulting spot color fast rating will be reduced to 1 ~ 2, if you need to adjust this fast spot color, please consult the technical department of the division. For products with high fast grade requirements, customers should not adjust themselves to avoid losses.
This product should be kept away from fire, sealed, shelf life of one year.